Sprinter 144HR Insulation Kit

Additonal Information below

Current Stock:

We have templated the two most common Sprinter vans in the current model year, and pre-cut polyisocyanurate Iko Enerfoil insulation to fit. We chose this rigid insulation due to it’s high R-value (6.2/inch). Depending on the cavity shape and depth, we combine nearly 100 1” and 1.5” pieces in glued into assemblies to rough fit to accommodate variations across vans.  We then use predrilled holes in the faces to insert spray foam, and then use the foam to seal the edges. We use closed cell, single component polyurethane foam to create a tight fit, vapour barrier, and to avoid any heat-based body deformations caused by two components foams. We feel this is the most effective option for insulating vans, and aim to save you time.

We sell the panels separately, with 16 lb. foam canisters, or installed. Depending on where you live, it may not make sense for us to ship the canisters due to weight, or you may choose to glue them in place and not mess around with the spray foam, which may cause body deformations if installed too quickly.

Mercedes Sprinter 144 HR    (current model only)                    

  • EkoFoil Insulation Panels Only                                                                                   $695
    • For walls, ceiling and doors. (Flooring assemblies sold separately.)
  • Insulation Panels with Spray Foam Canister                                                            $1,195
    • 1 canister of slow expansion single component Polyurethane foam
  • Panels with Foam Installed by Shelter OVC                                                              $2,195